induction heating coil

induction heating coil 1.Output frequency range 500Hz-10KHz 2.Output power range 20Kw-240Kw 3.Certificate: CE, ISO, VDE.

induction heating coil:

Diathermancy induction heating machine

The significant advantages of the Atec series of diathermancy induction heating machine is in the following: All air structure, high system efficiency, the F 30mm piece of steel, heated to 1050 °C, the power consumption of about 270 kWh per ton of steel, the bigger the diameter of the workpiece is, the lower the power consumption, the smaller the diameter of the workpiece is, the higher the power consumption. IGBT inverter, compared with SCR devices, efficiency improved significantly. Power factor high, above 50% load, input power factor above 0.90. Rated Power continuous operation design, system failure rate is low, the device has no water system failure. Built-in PID constant temperature process, realizing constant temperature operation. A variety of control methods and a rich interface, easy to implement automatic control. Precise control of the DSP, the frequency of automatic tracking, ensure that devices work in the best resonant state; and if the grid voltage fluctuated, the output power will remain unchanged. Fully functional and reliable protection limit, short circuit in the sensor, workpiece short-circuit, overload operation, abnormal fluctuations of the grid, the equipment will not be damaged. Output transformer isolation, the sensor voltage is low, and can be single-grounded. Air-cooled transformer design life of 10 years, no brass jams. No polarity filter capacitor design life of 10 years (electrolytic capacitors less than 5 years). The parameter setting functions online

Item	Indicator	Remark
Output power range	20Kw-240Kw
Output frequency range	500Hz-10KHz	AtecF Intermediate Frequency Series
	10KHz-100KHz	AtecD High Frequency Series
Output power adjustable range	5-100%
Output frequency tracking	Automatic
Closed-loop control stability	1%	C model is 0.1%
Efficiency	≥95%	Include output isolation transformer
Power factor	≥0.85
Input voltage	380VAC three phase
Input voltage range	+20%, -30%	0-100% load
Overload ability	1.2*rating, 1 min

Cabinet protection level	IP20
Cooling mode	IGBT and transformer air cooling	Inductor water cooling
Environment temperature	-20°C-45°C	0-100% load
	45°C-60°C	Running(reducing the power)
Altitude	≤1500m	More than 1500m(running reducing the power)

induction heating coil